Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Mount Washington
If your registers are weak, your rooms run uneven, or you’re seeing dust streaks on the ceiling near a vent, the ductwork is the first place to look. We handle duct repair and sealing for Mount Washington homeowners who want the system fixed, not just cleaned around. We know these hillside streets, and we schedule work here regularly, so getting a technician to your door in Mount Washington is straightforward. Our technicians have up to 14 years of experience, and they arrive with professional-grade equipment from Rotobrush and Nikro. Call (855) 683-8612 to set up a free estimate.
Why Mount Washington Homeowners Call Air Duct Cleaning Eagle Rock for Duct Repair & Sealing
When you call, we answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. We’re closed Saturday. That schedule keeps response to Mount Washington quick, and it means a leak discovered before a hot spell doesn’t have to wait.
What sets the work apart is scope. We repair and seal, then clean, then sanitize where needed – the whole air pathway treated as one system rather than a quick pass over the vents. Using Rotobrush rotary brush technology and Abatement Technologies containment equipment, we can pull debris under negative pressure and seal the joints that let it back in. That full-system approach is what earns repeat calls across Mount Washington, and it’s why property managers and owners of larger hillside homes here ask for the same people back.
We also come with a strong local reputation built on documentation: before-and-after photos of your own ducts, and one flat price per system agreed before work starts. You’ll know what’s being done and what it costs. Our team is experienced, and the local pro who performs the work is licensed and insured as the state requires.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Mount Washington
This is a page for homeowners who suspect the ductwork itself is the problem. Here’s how our duct repair & sealing work breaks down in Mount Washington, with the specifics that matter on these hillside lots.
Flex Duct Repair in Mount Washington
Much of the flexible duct in Mount Washington homes runs through tight attic cavities and under-floor spaces where it’s hard to reach and easy to damage. Tears, crushed runs, and joints that came loose from rodent activity or an imperfect original install are common. We reconnect and support those runs properly rather than taping over a gap that will reopen.

Mastic Sealant for Hillside Retrofits
Where the air handler sits in a retrofitted closet, mastic fails and tape peels at the metal joints, usually out of sight. We seal those connections with mastic and approved tape so the air you’re paying to cool actually reaches the rooms.

Air Leak Repair in Mount Washington
Because HVAC was added to these homes later, a single leak can sit at the end of a short, oddly routed run that takes real route-finding to trace. We find leaks with a camera inspection of supply and return, then close them where they are.

Duct Insulation
Attic cavities here bake in summer, and uninsulated runs lose their cool before the air reaches a register. Adding insulation to exposed duct in a Mount Washington attic helps the system hold its temperature.
Why Mount Washington Ductwork Is a Custom Puzzle
Most of these hillside mid-century moderns and self-built canyon homes were designed for natural cross-ventilation, not forced-air HVAC. The ducts were added years later, jammed into closets, crawlspaces, and attic cavities wherever they’d fit. The result is short, oddly routed runs, sometimes accessible only through a tight space, so sealing one leak can require as much route-finding as sealing an entire system in a flatland house. That’s why a standard sweep misses so much here. Every job in Mount Washington is a custom map, not a template.
After a Santa Ana wind event, the canyon’s position relative to wildfire smoke corridors shows up inside the equipment. Technicians routinely find a visible layer of fine ash and soot in return plenums and flex duct in Mount Washington homes, which flatland cleaners rarely see to the same degree. Hot, dry summers drive dust and pollen through the same openings, and because winters are mild, systems run year-round and the demand for cleaning and sealing never really drops off.
Trusted Brands We Service in Mount Washington
We work with industry-recognized equipment and products and can work with the systems and equipment already in your home, whether that means your duct runs, the air handler connections, or the filtration and air-quality hardware. We use Rotobrush rotary brush systems, Nikro equipment for cleaning and containment, and Abatement Technologies gear where compliance-grade filtration and containment matter. Finishing and sanitizing steps draw on Honeywell and Aprilaire products. We don’t claim to stock parts or hold inventory; what we do is arrive with the professional-grade equipment to inspect, repair, seal, and clean, and get the job moving without a runaround.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Mount Washington Homes
These are the failure modes that come up again and again on hillside properties, tied directly to how and when HVAC was added to these homes.
- Flex duct torn or disconnected in tight attic cavities. Rodent activity and rushed original installs leave gaps that pull in unconditioned air and ash. Runs squeezed into narrow attic spaces get crushed, which chokes airflow to the far rooms.
- Mastic and tape failures near the air handler. These connections hide behind closet walls or under-floor framing typical of hillside post-and-beam homes, so a leak can go unnoticed for years while it quietly drains efficiency.
- Return plenums pulling in fine ash after Santa Ana winds. The canyon channels smoke and particulate toward return intakes, and leaking joints let it inside. Unsealed return leaks overwhelm filters and cut system efficiency.
- Uneven airflow and dust streaks at registers. When supply runs leak or lose insulation, some rooms get plenty of air and others get little, a pattern that points straight to the ductwork rather than the equipment.
In a typical Mount Washington retrofit, a homeowner notices uneven airflow or dust streaks near a register and schedules an inspection. A qualified technician sets up negative pressure and HEPA filtration to contain debris, then runs a camera inspection of the supply and return. That often turns up disconnected flex joints or failed mastic at the air handler that were never properly sealed during the original installation. The fix usually means reconnecting and sealing the runs with mastic or approved tape, checking the blower motor and registers for related trouble, and documenting the work with before-and-after photos.
Pricing for Duct Repair & Sealing in Mount Washington, CA
We price per system by a written estimate, agreed before any work begins – no per-vent teaser, no surprise add-ons once a technician is on site. Larger Mount Washington homes often run three separate HVAC systems with long runs across multiple levels, and per-system pricing keeps each one accounted for on its own instead of buried in a lump sum. Typical ranges for this market:
- Spot air leak repair and mastic sealing: typically $250 – $600, depending on how many joints and how hard they are to reach.
- Flex duct repair or reconnect in an attic cavity: typically $300 – $700.
- Duct insulation for exposed runs: typically $400 – $900, by length and access.
- Whole-system sealing on a retrofitted hillside home: typically $700 – $1,400 per system.
Access is the big variable on these hillside houses – a run reachable only through a tight attic or under-floor space takes more route-finding than an open one. The written estimate is what sets the final price. Estimates are free. Call (855) 683-8612.
We Also Serve Cities Near Mount Washington
Our duct repair and sealing coverage reaches beyond the hills into the surrounding neighborhoods, so the same whole-system approach is available to nearby homeowners. We serve Glassell Park, Atwater Village, Highland Park, and Eagle Rock. The hillside retrofits and dry, windy conditions that shape ductwork in Mount Washington turn up across these areas too, and the work adjusts to each home’s routing and access.
Serving Mount Washington, CA – Our Local Coverage Area
We serve Mount Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Mount Washington
It makes every job a custom map. Because HVAC was retrofitted into homes built for cross-ventilation, duct runs are short, oddly routed, and often reachable only through tight attic or under-floor spaces, so sealing a single leak can take as much route-finding as a whole system elsewhere. A technician has to trace the run before touching it. Call (855) 683-8612 for an exact quote – estimates are free.
Check your filters first, then watch for dust streaks near registers and a fine ash film on return grilles. After Santa Ana winds, technicians routinely find a visible layer of fine ash and soot inside return plenums and flex duct in Mount Washington homes, and leaking joints let it settle deeper. A camera inspection confirms whether the leaks are the source. Call (855) 683-8612 to schedule one.
Because three systems means three separate networks of ductwork, and each needs its own inspection and seal. Per-system pricing keeps each one accounted for on its own line, so you’re not paying for a lump sum that hides how much work one system needs versus another. One flat price per system, agreed before work starts. Call (855) 683-8612 for a free estimate.
Before-and-after photos of your own ducts, including the joints and connections that were sealed. Since so much of this work happens behind walls and in attic cavities you can’t see, photos are how you confirm it was actually done. Ask for that documentation on any duct job. Call (855) 683-8612 to book an inspection.
Yes – sealing the leaks stops the dust, pollen, and ash that the wind pushes toward your return intakes from being pulled straight into the system. When joints at the air handler and in attic runs are closed, the filter does its job and the house stays cleaner. The climate here keeps systems running year-round, so sealed ducts pay off all year. Call (855) 683-8612 for an exact quote.
Call (855) 683-8612 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. One flat price per system, agreed before work starts, with before-and-after photos so you can see exactly what was sealed.
Written by the team at Air Duct Cleaning Eagle Rock.